1. Ask the assistant to take a cowl opened and lead round a marker contours of both loopy levels.
2. Disconnect a hose of supply of liquid of washing of a windshield from the tee cowl located from the lower party. Prepare for collecting the spilled liquid.
3. Serially from each of boards of the car turn out fixing screws and disconnect tires of grounding of a cowl.
4. Turn out fixing bolts and by means of the assistant remove a cowl from the car and transfer it to the safe place.
5. Estimate a side play of axial fingers of loopy assemblies, in case of need replace worn-out components. Each of loops pribolchivatsya to a car body. Before installation of a cowl grease loopy levels with universal lubricant.

1. By means of the assistant get a cowl on the regular place and freely screw fixing bolts. Achieve an adequate arrangement of loopy levels in the contours which are led round by a marker, then strongly tighten bolts. Connect a hose of supply of liquid of washing of a windshield to a tee.
2. Connect tires of grounding and strongly tighten bolts of their fastening.
3. Close a cowl and check uniformity of an arrangement of its rather adjacent body panels. In case of need weaken loopy bolts and make the corresponding adjustment. Having achieved satisfactory result, do not forget to tighten fixing bolts.
4. Height of provision of a first line of a cowl is corrected by means of the rubber buffers located in forward corners. Take the buffer, then weaken a lock-nut and as appropriate adjust the provision of a buffer bolt. Again tighten a lock-nut and return into place the buffer.
5. Having achieved the adequate provision of a cowl check serviceability of functioning of latches of its locks. In case of need weaken fixing bolts and adjust the provision of castle assembly(assemblies). Do not forget to tighten fixture.