1. Remove assemblies of forward indexes of turns (address the Head Onboard electric equipment).

2. Turn out two lower screws of fastening of a front grille (are located under indexes of turns).

3. Turn out two top screw or a clamp.

4. At the corresponding complete set turn out two forward fixing screws (through openings from the forward party of the panel of a lattice) and remove a lattice.

1. For protection of the lower surfaces of a body and a frame of the car various plastic boards and screens are used. Fastening of protective elements is carried out by means of screws and clamps which usually easily come to light at external survey of panels. Moving along the panel of a protective element, methodically turn out/release all fixture then the panel has to be removed freely. Remember that some fixing clamps have a two-component design. To remove such clamp it is necessary to take at first from it the central pin then the main part of the case with lock hooks is already taken out. On some models protective panels fasten by means of rivets which should be drilled.

2. At assembly replace the plastic clamps which failed during dismantle and track reliability of fixing of the panel. Rivets are subject to replacement by definition.