1. Having hooked, take fastening clamps to a bumper of panels of protection of wings (loker).

2. Having hooked, uncover access in loker of arches of forward wheels.

3. Working through the opened openings, give bolts of fastening of a bumper.

4. Through arches of wheels turn out side screws of fastening of a bumper to wings.

5. From under the car turn out three lower screws of fastening of a bumper.

6. At the corresponding complete set remove forward fog lights (address the Head Onboard electric equipment).

7. Through openings under installation of fog lights turn out back bolts of fastening of a front bumper (on one from each party).

8. Delay a bumper forward.

9. On models with the corresponding complete set do not forget to disunite contact sockets of an electrical wiring of fog lights.