1. Remove the inlet pipeline (see Removal and installation of the inlet pipeline and a final collector). Appearance of a turbocompressor and an arrangement of the accompanying components see on the illustration Arrangement of a Turbocompressor and the Accompanying Components.

2. Give a cap nut of nipple connection and disconnect a maslopodayushchy tube from the top part of assembly of a turbocompressor.

3. Cock the parking brake, then a front of the car and establish to a poddomkratta it on props.
4. Disconnect from a turbocompressor a reception pipe of system of production of the fulfilled gases (see Systems of decrease in toxicity and production of the fulfilled gases).

5. Working under the car, release fixing collars and remove the hose connecting a maslovozvratny tube of a turbocompressor to the branch pipe connected to the block of cylinders.

6. Turn out the screw of fastening of a maslopodayushchy tube to a basic arm on the back party of the block of cylinders.

7. Release a cap nut of nipple connection of a maslopodayushchy tube on the block of cylinders and pick up the phone from the engine.

8. Take the filter from nipple knot of a maslopodayushchy tube (from outside the block of cylinders). Estimate extent of pollution of the filter, in case of need clean or replace.

9. Working under the car, turn out two lower bolts of fastening of a turbocompressor.

10. Prop up assembly of a turbocompressor, then turn out the top bolt of its fastening and remove the remote plug.

11. Carefully take assembly of a turbocompressor from a motive compartment (at the top). If assembly is subject to further use, carefully a zakuporta all openings in it in order to avoid dirt hit.