1. Disconnect a negative wire from the battery.
2. Remove a steering wheel (address the Head the Running gear and steering).
3. Remove casings of a steering column (address the Head Kuzov and finishing of salon).
4. Open a cover of the assembly block of safety locks for the purpose of ensuring access to the screw of fastening of side angular finishing section from the driver's party of the dashboard.
5. Turn out the top and lower screws of fastening of the angular finishing panel, pull the panel on yourself and disconnect an electrical wiring of switches. Try to remember an order of connection of contact sockets. Remove the panel.

6. Turn out three screws / release clamps of fastening of the finishing panel of switches located under an instrument guard. Release the left edge of the panel from "Torpedo", then pull assembly on yourself and disconnect an electrical wiring from switches. Try to remember an order of connection of contact sockets. Remove the panel.

7. Turn out two lower fixing screws and one top, then pull an instrument guard on yourself and disconnect an electrical wiring of a combination of devices.