1. Open a cowl.

2. Release a clamp and uncover the back party of a block headlight.

3. Disconnect an electrical wiring from a back part of the boss to the subject replacement of a lamp (a wire of red color). Squeeze lock uvulas and release a spring clamp of fastening of assembly of a lamp with the boss in a back part of a block headlight.
Above — the Contact socket of an electrical wiring and a spring clamp of fastening of the boss of a lamp of driving beam
Below — the Contact socket of an electrical wiring and a spring clamp of fastening of the boss of a lamp of passing beam
1 and 2 — lock uvulas of a spring clamp

4. Take assembly of a lamp with the boss from a block headlight.

5. Try not to touch a flask of a new lamp barehanded, - use a napkin or pure rags. The fatty spots left by fingers on glass lead to decrease in intensity of lighting and reduction of service life of a lamp. Remove incidentally left marks with the rags impregnated with methyl alcohol.
6. Establish assembly of a new lamp. Track correctness of hit of lock uvulas in grooves of cartridge assembly. Record assembly by a spring clamp and connect to it an electrical wiring.
7. Establish into place a plastic back cover of a block headlight, having tracked correctness of its landing.

1. Open a cowl.
2. Release a clamp and uncover the back party of a head block headlight.
3. The lamp of a marker light is located between two lamps of head lighting.

4. Turn a cartridge of a lamp on a quarter of a turn counterclockwise and take assembly of a lamp with the boss from a block headlight.

5. The lamp has press landing in the boss.
6. Replace a lamp and establish assembly of the boss in a block headlight. Act as it should be, the return to a dismantle order.

1. Open a cowl.

2. From the inside of a wing release a fixing clamp and push out assembly of the index of turn from a wing forward (the arrow showed a fixing clamp).

3. Turn cartridge assembly counterclockwise and take it from assembly of the index.

4. The lamp is equipped with a socle of bayonetny type.
5. Replace a lamp and establish cartridge assembly and the index on the regular places. Act as it should be, the return to a dismantle order.

1. Shift assembly of the repeater forward and release it from the body panel.

2. Turn cartridge assembly counterclockwise and release it from assembly of the repeater.

3. The lamp has press landing in the boss.
4. Replace a lamp and install the repeater on the regular place. Act as it should be, the return to a dismantle order.

1. Remove a headlight (see Removal and installation of external lighting and alarm fixtures).
2. Turn a back cover of a headlight on a quarter of a turn counterclockwise and remove it.

3. Disconnect a lamp electrical wiring from contact on a cover.

4. Wring out lock uvulas and release a spring clamp of fastening of cartridge assembly in a back part of a headlight.

5. Take a cartridge with a lamp.

6. Try not to touch a flask of a new lamp barehanded, - use a napkin or pure rags. The fatty spots left by fingers on glass lead to decrease in intensity of lighting and reduction of service life of a lamp. Remove incidentally left marks with the rags impregnated with methyl alcohol.
7. Establish assembly of a new lamp. Track correctness of hit of lock uvulas in grooves of cartridge assembly. Record assembly by a spring clamp and connect to it an electrical wiring.
8. Establish into place a plastic back cover of a headlight, having tracked correctness of its landing.
9. Establish assembly of a headlight on the regular place (see Removal and installation of external lighting and alarm fixtures).

1. Open a back door.

2. Release a clamp and open a back folding cover of lantern assembly.

3. Wring out two lock uvulas and take assembly of a lamp holder from a lamp.
Above — Clamps of fastening of a lamp holder
Below — Removal of a lamp holder of the back combined lamp from a back door

4. In a lamp lamps with socles of bayonetny type are used.
5. Replace the failed lamps and collect a lamp. Act as it should be, the return to a dismantle order.

1. In the luggage compartment give a fixing nut (i) and release assembly of the combined lamp from a wing.
Above — Fixture of a cover of the back combined lamp (Hatchback)
Below — Fixture of a cover of the back combined lamp (Station wagon)

2. Wring out lock uvulas and take a lamp holder from lantern assembly.

3. In a lamp lamps with socles of bayonetny type are used.
4. Replace the failed lamps and collect a lamp. Act as it should be, the return to a dismantle order.

1. Having hooked the small screw-driver, remove a lens from assembly of a lamp.

2. The lamp has press landing in the boss.

3. Replace a lamp and establish into place a lens.

1. The stoplight is built in at a car back door.

2. Open a back door.

3. For the purpose of ensuring access to a lamp holder, give two fixing nuts.