1. Weaken a collar(s) and disconnect a ventilating hose(s) from the air sleeve connecting the air cleaner to the throttle case. Afterwards release fixing collars, disconnect an air sleeve from the air cleaner and remove it from the car. Where it is required, remove a rubber sealing ring from the throttle case.
2. Release two clamps, turn out two screws in a forward part of a cover of a head of cylinders and uncover the air cleaner a head of cylinders. Take the filtering element.
3. For removal of an inlet air duct give a bolt of fastening of its back section to an end face of a head of cylinders, then weaken a fixing collar and disconnect a sleeve from a cover of a head of cylinders. Turn out a bolt of fastening of forward section of an air duct to a cross beam and take a sleeve from a motive compartment.