1. Release clamps in the top part of a cover and release from them fuel hoses.
2. Turn out two fixing bolts in the basis of a cover and take the last from a motive compartment.

1. Turn out two fixing bolts located directly under a support arm.
2. Shift a cover up, for removal from the guides of pins located in the basis.
3. Take a cover from a motive compartment.

1. Remove a pulley of a bent shaft (see Removal and installation of a pulley of a bent shaft).
2. Remove the central cover (see above).
3. Turn out two fixing bolts and remove the lower cover from the engine. Pay attention that on some models it is necessary to otboltit and remove previously assembly of a natyazhitel of an auxiliary driving belt.

1. Release clamps in the top part of a cover and release from them fuel hoses.

2. Turn out two fixing bolts.

3. Take a cover from a motive compartment, having pulled it up.

1. Remove a pulley of a bent shaft (see Removal and installation of a pulley of a bent shaft).

2. Turn out three fixing bolts and remove the lower cover of a gas-distributing belt from the engine.

3. Pay attention that on some models it is necessary to otboltit and remove previously assembly of a natyazhitel of an auxiliary driving belt.