1. Disconnect a negative wire from the battery.
2. Remove the central console (address the Head Kuzov and finishing of salon).

3. At the corresponding complete set release the control unit of the uniform lock from the bearing arm on a floor of salon. On the models equipped with natyazhitel of seat belts shift an arm for the purpose of ensuring access to nuts of fastening of a control lever of the parking brake aside, - try not to allow tensions of an electrical wiring of the control unit of natyazhitel.

4. Disconnect driving cables of the parking brake from supports of brake mechanisms (see Removal and installation of cables of the drive of the parking brake).
5. Release from an arm behind assembly of a control lever the sensor switch of a control lamp of raising of the parking brake, disconnect the corresponding electrical wiring.

6. Disconnect primary cable of the drive of the parking brake from a control lever.

7. Give three fixing nuts and remove assembly of a control lever of the parking brake.