1. The drive of the water pump is carried out by a gas-distributing belt. The pump приболчен to the block of cylinders from the GRM drive.
2. Empty the cooling system (address the Head Routine maintenance).
3. Take off a GRM drive belt (see the Head Remont of the engine).

4. Turn out fixing bolts and take assembly of the pump from the block of cylinders (optimum access opens through a wheel arch). Remove sealing laying.

1. Make sure of absoluteness of purity and dryness of the interfaced surfaces of the pump and block of cylinders.
2. Install the pump on the regular place (do not forget to replace laying).
3. Establish a GRM drive belt (see appropriate section of the Head Remont of the engine).
4. Fill the cooling system (address the Head Routine maintenance).