1. If dismantle of covers is made for the purpose of replacement of a gas-distributing belt, remove an arm of fastening of the right support of the power unit to a body (see Removal and installation of components of the right support of the power unit and a natyazhitel of a gas-distributing belt) for the purpose of expansion of working space.
2. Release the top clamp of a cover.

3. Having hooked the screw-driver, release the lower lock uvula, lift a cover up and remove it from the engine.

1. Remove the top forward cover (see above).

2. Release two clamps, uncover fixing hairpins on a forward wall of the engine and lift it up. The working space is extremely limited therefore for the purpose of its expansion it will be reasonable to dismantle previously the carburetor of the corresponding support of the power unit (see Removal and installation of components of the right support of the power unit and a natyazhitel of a gas-distributing belt).

1. Give fixing the screw with a nut and uncover the engine.

1. Remove a forward cover (see above), then turn out fixing bolts and remove a back cover.

1. Remove a pulley of a bent shaft (see Removal and installation of a pulley of a bent shaft).

2. Turn out two fixing bolts and remove the lower cover of a gas-distributing belt from the engine.

1. Remove a pulley of a bent shaft (see Removal and installation of a pulley of a bent shaft).
2. Remove both top covers (see above).
3. Give fixing nuts and bolts and remove the lower cover.