4.2.13. Removal and installation of the pallet of a case
See Removal and installation of the pallet of a case of the engine of a part the Repair procedures which are not demanding extraction of the engine from the car - petrol engines.
- 1. Introduction
- 2. Operation manual
- 3. Routine maintenance
- 4. Repair of the engine
- 4.1. The repair procedures which are not demanding extraction of the engine from the car - petrol engines
- 4.2. The repair procedures which are not demanding extraction of the engine from the car - diesel engines
- 4.2.1. Measurement of compression pressure and check of the engine on tightness
- 4.2.2. Fixing cranked/distributive shaft and TNVD for the purpose of prevention of casual hit of valves in contact with pistons in the course of performing procedures of service of the car
- 4.2.3. Removal and installation of a cover of a head of cylinders
- 4.2.4. Removal and installation of a pulley of a bent shaft
- 4.2.5. Removal and installation of covers of a gas-distributing belt
- 4.2.6. A GRM drive belt - the general information, removal, check of a state and installation
- 4.2.7. Removal and installation of cogwheels of a belt of the GRM drive
- 4.2.8. Removal and installation of components of the right support of the power unit and natyazhitel of a gas-distributing belt
- 4.2.9. Removal and installation of an intermediate roller of a gas-distributing belt
- 4.2.10. Removal, check of a state and installation of the camshaft and pushers of valves
- 4.2.11. Check and adjustment of valvate gaps
- 4.2.12. Removal and installation of a head of cylinders
- 4.2.13. Removal and installation of the pallet of a case
- 4.2.14. Removal, check of a state and installation of the oil pump with a driving chain
- 4.2.15. Replacement of epiploons
- 4.2.16. Sensors of level, pressure and temperature of motive oil - the general information
- 4.2.17. Removal, check of a state and installation of a flywheel / driving disk
- 4.2.18. Check of a state and replacement of support of a suspension bracket of the power unit
- 4.2.19. Removal and installation of the oil cooler
- 4.3. Removal and capital repairs of the engine
- 5. Cooling systems, heating
- 6. Power supply system and release
- 7. Engine electric equipment
- 8. Coupling
- 9. Transmission
- 10. Power shafts
- 11. Uniform hydraulic system
- 12. Brake system
- 13. Running gear and steering
- 14. Body and finishing of salon
- 15. Onboard electric equipment
- 16. Schemes of electric equipment
