6f6d7d92


2.3. Comfort

Ventilation

Air circulation

The climatic comfort is reached due to uniformity of distribution of air streams on the volume of salon.


Scheme of distribution of air streams

Nothing has to prevent free intake of air. You watch lattices of the air inlet located in the windshield basis, regularly clear it of dry leaves and other foreign objects, delete snow traffic jams in the winter. Try to avoid hit of water in air inlets when washing the car.

Do not block pass under front seats to provide easy access of air in foot wells of a back part of salon.

Deflectors of lobbies snuffled ventilating air ducts are supplied with the rychazhka allowing to regulate receipt intensity of air supply and the direction of its stream (up-down, to the right-to the left).

Management of functioning of systems of heating/ventilation of salon

Control lever distribution of an air stream

The choice of the direction of distribution of an air stream on interior of the car is carried out by means of the lever (1) on the control panel of functioning of systems of heating/ventilation. The control panel is located in a middle part of the dashboard directly over the place of its joint with the central console (see the illustration Scheme of Distribution of Air Streams ).


Control panel of functioning of systems of heating/ventilation of salon

1 — the Control lever distribution of an air stream
2 — the Lever of the choice of the scheme of air circulation

3 — the Control lever temperature of the air given to salon
4 — the Lever of the choice of the high-speed mode of the fan

When translating a control lever by distribution of air in the given vent provision of an air stream it is carried out at the level of the person.
Transfer of the lever to this situation the air stream goes to foot wells.
In this situation the stream is evenly distributed between nozzles of foot wells and an obduva of a windshield.
This position of the lever has to be chosen for an intensive obduv of a windshield.

Lever of the choice of the scheme of air circulation

By means of the lever (2) on the control panel the choice of one of two possible schemes of air circulation is carried out: opened or closed (see the illustration Control Panel of Functioning of Systems of Heating/ventilation of Salon ).

When the lever is transferred to extreme right situation, the open scheme of circulation when fresh external air constantly continues to come to salon is carried out. This scheme is the most productive at fight against an otpotevaniye of glasses.

Transfer of the lever to extreme left situation carries out switching of system in the mode of the closed recirculation of air in salon. This scheme is used at journey through strongly dusty or gas-polluted areas, and also to prevent hit in salon badly of the smelling air. Remember that long use of the mode of the closed recirculation leads to developments of stagnation, and also is fraught with an otpotevaniye of glasses.

Air temperature regulator

By means of the lever (3) (see the illustration Control Panel of Functioning of Systems of Heating/ventilation of Salon ) control of temperature of the air forced in salon is exercised.

The lever (4) (see in the same place) serves for inclusion/switching off of the fan and the choice of the high-speed mode of its functioning.

Models with the air conditioner

The air conditioning system (K/V) allowing to support the most comfortable climatic conditions in interior of the car regardless of temperature and humidity of air is included in the package of some models. In a refrigerator path of system environmentally friendly coolant is used. The cooling system of air operates only at the working engine.

For inclusion To/in press the switch located on the dashboard near the switch of the alarm system. The button of the switch is equipped with the green control lamp confirming activation of system.

Remember that maximum efficiency of functioning of the conditioner can be reached only at the closed windows.

At an excessive warming up of salon during the long parking in the open sun before turning on the conditioner air salon by opening of windows (do not forget then them to close).

For increase in efficiency of functioning of air conditioning system and speed of cooling of salon in hot weather use the mode of the closed air recirculation for what move a control lever (E) to extreme left situation.


Control panel of functioning of systems of heating/ventilation and air conditioning

Install the lever of the choice of the high-speed mode of the fan (A) in average situation. In order to avoid a stagnation of the closed air, cancel the recirculation mode at once as soon as the salon enough is cooled.

In order to avoid destruction of material of sealing cuffs of components of a cooling path the conditioner has to be used regularly, turning on for a short time at least once in a month.

Use To/in in winter season allows to cope as fast as possible with an otpotevaniye of glasses in salon.

At the salon which is switched off To/in air temperature lower than the ambient temperature cannot be supported.

The choice of temperature of the air given to salon is carried out by means of the lever (V) (see the illustration Control Panel of Functioning of Systems of Heating/ventilation and Air Conditioning ) on the control panel (in combination with inclusion/switching off To/in). To optimum climatic conditions there corresponds position of the lever 22. At the request of the operator air can be warmed in addition up, or is cooled.

In extreme provisions of the lever (blue and red sites of a scale) the automatic mode of adjustment of speed of rotation of the fan (see below) does not work.

The choice of the high-speed mode of functioning of the fan is carried out by means of the lever (A) (see in the same place). Position of AUTO corresponds to the choice of the mode of automatic adjustment of speed of forcing of an air stream. Besides the automatic mode the choice of the high-speed mode can be carried out by movement of the lever at the discretion of the operator in one of five discrete provisions (on increasing from left to right).

The position of the lever marked with the image of a krylchatka corresponds to shutdown of the fan.

Fight against an otpotevaniye of glasses

When translating a control lever distribution of an air stream (D) (see the illustration Control Panel of Functioning of Systems of Heating/ventilation and Air Conditioning ) in the situation corresponding to a glass obduv, the system of automatic adjustment carries out selection of the optimum temperature and high-speed conditions of an obduv wind and forward side glasses, depending on temperature of external air.

For providing the most comfortable conditions in salon transfer the lever D to the position second on the right.

The choice of temperature condition is carried out by means of the lever B. Extreme left position of the lever answers the minimum temperature of the given air, extreme on the right - maximum.

Authors of the present manual offer the following basic scheme of adjustment of climatic conditions in interior of the car:

Temperature of external air

Choice of the direction of giving of an air stream

Provision of defleketor of ventilating glasses

Low

In legs or in legs and on having blown in glasses

Side are open, central are closed

Average

In legs

All four are closed

High

In a face

All four are closed

Illumination of salon

Forward ceiling lamp

In a plafond of the ceiling lamp the polzunkovy switch having two provisions is built in. Transfer of the toddler of the switch to the left situation carries out inclusion of the constant mode of lighting. In the right position of the toddler the lamp will turn on only when opening any of car doors. Shutdown of the lamp after closing of doors happens to a delay in 15 seconds.

Back ceiling lamp (Station wagon models)

The switch which is built in in a plafond of the back ceiling lamp (Station wagon model) has three provisions: at transfer of the toddler to situation (1) the lamp will turn on when opening a door of a back; on average situation (2) the lamp is switched-off; situation (3) allows to turn on the lamp in the mode of continuous functioning.

Lamps for reading

Inclusion and switching off of a lamp for reading is carried out by means of the individual switch which is built in in its plafond. Lamps work only at the included ignition.

Illumination of the luggage compartment

Illumination joins automatically when opening a door of a back.

Illumination of a ware box

Illumination joins automatically when opening a cover of a box and functions only at the included ignition. Do not forget to close a box.

Ware boxes

Door pockets

For opening of a pocket raise and delay an armrest.

Main ware box of the dashboard

The main ware box is located from the passenger party of the dashboard and on models without safety cushions. It consists of two sections (top and lower).

On an illustration illumination of a foot well is also shown.

On the models equipped with a passenger safety cushion, the top section of a box is occupied with the pillow module.

Deepening under the handle is provided in a cover (ah) of a ware box.

Illumination of a foot well

The lamp of illumination is located under the dashboard and joins when opening the corresponding door of the car, lighting a rug in a foot well and space under the dashboard (see an illustration above)

Pocket for storage of the coupon of passing of checkup

The pocket is fixed on a windshield from the driver.

Electronic clock

Assembly of hours is built in in a middle part of the dashboard, to the right of the button of turning on of the alarm system.

At inclusion ignition on the display for about 5 hours of seconds date is highlighted, then hours come back to the mode of display of the current time.

For compulsory highlighting of date press the button D to the right of the display of hours (see an illustration above). Hours will return to the mode of display of time automatically 10 seconds later, or by a repeated nazhimaniye on the button D.

Display and installation of time are made only at the included ignition:

By means of the button N (see an illustration above) correction of the hour indicator is made.

The button M carries out adjustment of minutes. The transfer from a 12-hour cycle to 24-hour is also back carried out by a simultaneous nazhimaniye on both buttons N and M.

Installation of date is made also at the included ignition. The button N makes updating of indications of the left zone of the screen, by the button M - right. Day/month in the mode month put the translation from the mode and it is back made simultaneous by squeezing of both buttons N and M.

Temperature measuring instrument

At the included ignition the screen of the measuring instrument highlights temperature of external air. If air temperature is in limits between + 3 °C and - 3 °C, on the screen of the display the image of a snowflake begins to blink. At a temperature below - 3 °C the snowflake begins to be highlighted constantly.

The shown temperature can be higher, than real if the car costs in the sun.

Ashtray/lighter

Assembly of a forward ashtray with the lighter

Assembly of a forward ashtray with the lighter is established in a middle part of the dashboard under the control panel of functioning of systems of heating/ventilation / air conditioning.


 PERFORMANCE ORDER

1. Drown the button of the lighter and wait several seconds. When the working element of the heater is heated, the button will automatically jump out of the nest. Be careful, the lighter functions also at the included ignition!

2. For extraction of an ashtray, pull for the uvula located under it and raise assembly on yourself. Installation is made upside-down (fill assembly in a nest and push down).

Back ashtray of the central console

For opening of an ashtray push/pull an assembly cover in the direction of a back seat back. To release an ashtray, pull it on yourself, pressing a uvula.

The Poruchnevy handle with a hook for clothes

Handles are located at the edges of the ceiling panel over doorways.

Sun-protection peaks

Folding peaks are located directly over a windshield and serve for protection of eyes of the driver and the forward passenger against hit of direct sunshine. Also the possibility of deployment of peaks for protection against side beams is provided: release an internal arm of assembly from a support and develop a peak towards side glass.

On some models the sun-protection peak can be equipped with a toilet pocket mirror with illumination which joins automatically when opening a cover of a pocket mirror.

Back sun-protection blind (Hatchback models)

The blind fastens over back glass of the car. For its deployment pull for a special uvula and fix its cores. Deployment of a blind does not prevent opening of a door of a back.

Office for storage of documents

On inside of a cover of the assembly block of safety locks the special office for storage of driver's documents is provided. The assembly block is located under the car dashboard at the left, for opening of its cover turn the handle on a quarter of a turn.

Adjustment of height of a road gleam

The possibility of adjustment of height of a road gleam allows to adapt easily and quickly the car to any road conditions. Except for exceptional cases it is offered to use the normal height of installation of a suspension bracket. For adjustment of height of a suspension bracket unblock, having pulled up, the handle of management located on the central console of the car and move it to the relevant provision.

Handle of adjustment of height of a road gleam

The minimum height of installation of a suspension bracket has to be used only when passing checkup.

Normal situation serves for operation of the car in usual road conditions.

Transfer of a suspension bracket to an intermediate position allows to adapt the car to cross-country conditions. Rigidity of a suspension bracket significantly increases in this situation, it is necessary to move at the minimum speed.

The maximum situation at the movement of the car should not be used and serves for performance of replacement of wheels and control of level of hydraulic liquid.

Performing any works under the car, do not forget to fix a body by props!

Hydroactive suspension bracket

Height of provision of a hydroactive suspension bracket is controlled by an electronic control system. Two modes of functioning of a hydroactive suspension bracket between which switching is carried out by the special button of management located on the car dashboard to the left of buttons of the alarm system and a tempostat are provided. In the button the control lamp of yellow color is built in.

At the wrung-out button (the control lamp does not burn) the mode of the usual movement providing the maximum degree of comfort with tracking of changes of road conditions joins.

At a button utaplivaniye (the control lamp burns) transition to the sports mode of the movement more urgent at movement on twisting roads is made.

The design of a suspension bracket provided also the possibility of control of a list of a body of the car allowing in an essential measure to increase comfortableness of the movement safety at commission of abrupt turns. Be careful when driving, not a likhachta!

Options of connection of the radio tape recorder

Open a niche cover under installation of the radio tape recorder and take a casing, having provided thereby access to blocks of three contact sockets of an electrical wiring and to the plug of an antenna cable.

Study the instruction of the user of the radio tape recorder.

Blocks of contact sockets of an electrical wiring of the radio tape recorder

In standard assemblies the following schemes of an arrangement of contact plugs in blocks of electric sockets are used:

A1

-

B1

(+) The right back loudspeaker (if it is provided)

A2

-

B2

(-) The right back loudspeaker (if it is provided)

A3

-

B3

(+) Right forward loudspeaker

A4

(+) Constantly energized

B4

(-) Right forward loudspeaker

A5

-

B5

(+) Left forward loudspeaker

A6

(+) Rheostat

B6

(-) Left forward loudspeaker

A7

(+) Accessories or (or constantly energized)

B7

(+) The left back loudspeaker (if it is provided)

A8

Weight

B8

(-) The left back loudspeaker (if it is provided)

 

With

The socket of a supply of an electrical wiring of remote control from a steering wheel

It is necessary to remember that for optimum reception of a radio signal the mast of the antenna has to be inclined. We recommend to incline the antenna parallel to a windshield.

Installation of loudspeakers

Loudspeakers on the dashboard

At the edges of the panel of priors two loudspeakers are located. Remove decorative lattices, connect loudspeakers, fix them by two screws and return to the place of a lattice.

Loudspeakers of forward and back doors

On forward doors loudspeakers with a diameter of 165 mm are installed.

 PERFORMANCE ORDER

1. Having hooked the thin screw-driver, release three clamps and remove a decorative lattice.

2. According to marks cut out the lower part of the isolating panel, having prepared thereby a nest under installation of the loudspeaker.

3. Connect the loudspeaker and fix it by means of four nuts. Establish into place a lattice.

On back doors loudspeakers with a diameter of 130 mm are put. The order of installation is similar described above for loudspeakers of forward doors.

Top hatch

The top hatch is not included in a basic equipment of all models.

Luke can or rise from the rear edge, or move together with a sun-protection blind.

The sun-protection blind can be pushed manually both at the closed hatch, and after a raising of its rear edge.

The switch of management of functioning of the electric drive of the top hatch is located on the central console, behind the handle of correction of a road gleam.


Installation of the top hatch as an additional complete set on the models equipped with side safety cushions is forbidden!