6f6d7d92


7.3.3. Removal and installation of the control unit of system of preheat

Removal

The block is located in the left part of a motive compartment, behind the battery and is covered with a plastic cover.

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Give a fixing nut and remove the block.
3. Disconnect an electrical wiring from the block basis, then give two fixing nuts and release the main giving cable and a wire of food. Take the block from a motive compartment.

Installation

Installation is made upside-down. Track correctness of connection and reliability of fastening of contact sockets.